Skip to product information
1 of 16

USED FENDER MADE IN JAPAN / Traditional II 50s Stratocaster MN BLK [03]

Serial Number : JD20018542

[SN JD20018542] USED FENDER MADE IN JAPAN / Traditional II 50s Stratocaster MN BLK [03]

Item Code: 03-2800005269215
Condition: USED
Store: [03] ochanomizu

Regular price ¥84,901 JPY
Regular price Sale price ¥84,901 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
The Fender Made in Japan / Traditional II 50s Stratocaster MN BLK is now in stock as a used item.

Included accessories: Fender soft case, tremolo arm, wrench, and manual.

The frets have been dressed, so the playing condition is excellent and the guitar is ready to play.

There are small dents and faint scratches on the body, but no major damage. The pickguard shows signs of use, including some warping; however, after we received this item, we replaced the strings with new ones and our repair department performed a thorough cleaning, maintenance, and setup on all parts.

Condition: B+: Some minor scratches, but no issues for normal use

Serial Number: JD20018542
Year of Manufacture: 2020
Country of Manufacture: Japan
Case: Soft Case
Accessories: Arm, wrench, manual
Weight: 3.23 kg
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Note: While the frets can still withstand filing, they are on the low side
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.4 mm
Neck thickness near the 1st fret: 22.7 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, fret leveling

* As this is a used item, there may be scratches, dents, or other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This item is a one-of-a-kind product currently listed simultaneously on multiple online marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.
FENDER MADE IN JAPAN / Traditional II 50s Stratocaster MN BLKが中古で入荷。

付属品:Fenderソフトケース、アーム、レンチ、マニュアル。

フレットのすり合わせ調整を行っておりますのでプレイコンディションは問題無く十分お使い頂ける状態です。

ボディに小さい打痕や薄い擦り傷はございますが、大きいダメージはございません。またピックガードに歪み含め使用感はございますが、こちらの商品は弊社入荷後、弦を新品に張り替えを行い、弊社リペア部門にて各部クリーニング、メンテナンス&セットアップを行っております。

商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: JD20018542
製造年: 2020
製造国: 日本
ケース: ソフトケース
付属品: アーム、レンチ、マニュアル
重量: 3.23kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 注意点ありまだ切削に耐えるがフレット低め
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 41.4mm
ネック厚1フレット付近: 22.7mm
ネック厚12フレット付近: 24.0mm
スケール: 648mm (25.5")
RADIUS: 241mm (9.5")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4