USED FENDER JAPAN (-2015) / 1987-88 PB62-55 3-Tone Sunburst [05]

Fender Japan's PB62-55 is now in stock.
From the serial number, this model was manufactured at the Fujigen factory between 1978 and 1988.

Basswood body, maple neck, and rosewood fingerboard.
The pickups have been changed to Seymour Duncan quarterpounds by the previous owner.

The guitar has been checked and adjusted by a professional repair person after arrival, and is in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: G009612
Year of manufacture: 1987-1988
Country of manufacture: Japan
Case: Soft case
Weight: 3.56kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Residuals: Still good for cutting but low frets.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 24.9mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: .045-.105 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, strap pin replacement

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
G009612

Year of manufacture
1987-1988

Country of manufacture
Japan

Case
Soft case

Weight
3.56kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Remaining frets
Note that the frets are low and can still withstand cutting.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
24.9mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings at setup
.045-.105 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, strap pin replacement