USED FENDER JAPAN (-2015) / STS-55R CAR [05]

Fender Japan's STS-55R is now in stock.

This is a short scale Stratocaster model that was produced by Fender Japan.
This rare model is now out of production.

The truss rod has almost no margin in the tightening direction.
There are some scratches, dents, and peeling paint, but it has been checked and adjusted overall by a professional repair person after arrival, and is in good playing condition.

This is a junk item that does not work perfectly.

Item Rank: B+: Some scratches, but no problem in normal use.
Serial Number: C027407
Country of manufacture: Japan
Case: Soft case
Weight: 3.50kg
Truss Rod: Note: Neck is currently in good condition at rod limit
Fret Remaining: Note: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.1mm
Neck thickness near 1st fret: 19.2mm
Neck thickness near 12th fret: 20.9mm
SCALE: 610mm (24")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs : .009-.042

Item Rank
B+: Some scratches, but no problem for normal use

Serial No.
C027407

Country of manufacture
Japan

Case
Soft case

Weight
3.50kg

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.1mm

Neck thickness near 1st fret
19.2mm

Neck thickness near 12th fret
20.9mm

Scale
610mm (24")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment