USED Fender Japan / JM-CHAMP10 VWH [05]

JM-Champ10 made by Fender Japan is now in stock.

This Fender mini guitar was manufactured in the 1990s.
The body is equipped with a speaker, and the 3-way switch can be switched between OFF, Clean, and Drive.
The 610mm scale is similar to that of a mustang, making it a popular model as a travel guitar.

The guitar has some signs of use such as scratches and dents, but it has been checked and adjusted as a whole by a professional repair person after arrival, and is in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: N082139
Country of manufacture: Japan
Case: Original soft case
Weight: 2.88kg
Truss Rod: Approx. 30° remaining on the tightening side
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.7mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 22.7mm
Neck thickness near 12th fret: 24.1mm
SCALE: 610mm (24")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret edge treatment, and gouge removal
Other: Arm missing

* The truss rod, remaining fretboard, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
N082139

Country of manufacture
Japan

Case
Genuine soft case

Weight
2.88kg

Truss Rod
Approx. 30° remaining on tightening side

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.7mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
22.7mm

Neck thickness near 12th fret
24.1mm

Scale
610mm (24")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret edge treatment, and gouge removal

Other
Arm missing