USED FENDER / 1972 Telecaster [05]

We have a 1972 Fender Telecaster in stock!

The neck is date stamped "3 APR 72B", confirming that it was made in 1972.
Both front and rear pickups have been changed (make and model unknown), and two pot dates of 1376632 and '66 have been installed.
There is no possibility that these parts are original since they are older than the year of manufacture, but there is a good chance that they have been changed since there is a considerable gap in the years between the years.

The nut, frets, and pickguard have been changed. The pickguard has been changed to a 50's style black guard. The pickguard has been changed to a 50's style black guard, and there are also changes to the control plate and other fixing screws.
The pegs seem to be original, but there is a slight malfunction on the 2nd string peg, but it is not a problem that prevents the strings from being wound, so it is not a major problem when using the instrument.

The paint has some strong burns, which is relatively common in 70's models.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial number: 343046
Year of manufacture: 1972
Country of manufacture: USA
Case: Non-authentic semi-hard case (made by MONO), moderately to strongly used.
Accessories: Pick guard
Weight: 3.83kg
Truss Rod: No problem with the neck, as it is now, with a note that the rod has been loosened and cut off.
Fret Level: No problem, sufficient fret height.
String Height: 2.0mm above the 12th fret on the bass string side
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.65mm
Neck thickness near 1st fret: 23.02mm
Neck thickness near 12th fret: 24.84mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
343046

Year of manufacture
1972

Country of manufacture
U.S.A.

Case
Non-genuine semi-hard case (made by MONO, with medium to strong signs of use)

Accessories
Pick guard

Weight
3.83kg

Truss Rod
Note: There is no problem with the neck at present because the rod has been loosened and cut off.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.65mm

Neck thickness near 1st fret
23.02mm

Neck thickness near 12th fret
24.84mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment