USED FENDER CUSTOM SHOP / 50s Storatocaster MOD 1990 2 Color Sunburst [06]

Custom Shop made ash body 50's style Strat in Players condition!

Made in 1990 based on neck date and pot date.
It has an ash body, one-piece maple neck, round string guide, and 54 reissue look, but we can't tell the exact year of the reissue.

The neck is a rounded C shape and has been refretted and over-lacquered.
Pickups are black bobbin type, but we are not sure if they are original or not.
The wiring has been changed so that tone 1 works front/center and tone 2 works rear, and a condenser has been added. The selector is a 3-point type.
The inside of the cavity is sealed with aluminum foil.
The bridge has been replaced with a Gotoh Wilkinson, and the pegs have been replaced with Gotoh locking type pegs.
The strap pins have been changed to Jim Dunlop locking pins, but the strap side parts are missing.

As mentioned above, there are traces of over-lacquer on the head top and body as well as over-lacquer on the neck.
The end of the body has extensive paint discoloration due to stand burning.
There are also numerous other dents with paint tarnish, scratches, and paint peeling throughout the body, as well as rust and tarnish on metal parts.
The back panel is missing, and no certificate or other certification is included.
Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: V050686
Year of manufacture: 1990
Country of manufacture: USA
Case: Hard Case
Weight: 3.79kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 18.4mm
Neck thickness near 12th fret: 23.3mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, peg bushing lifting correction

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of this item. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
V050686

Year of manufacture
1990

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.79kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.7mm

Neck thickness near 1st fret
18.4mm

Neck thickness near 12th fret
23.3mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, peg bushing lifting correction