USED yamaha / fg-180 [06]

YAMAHA FG-180 used is in stock now!
The serial number indicates that it was made in 1972.
Spruce plywood top, mahogany plywood sides and back, mahogany neck, rose fingerboard, and scratches, dents, and dull metal parts commensurate with its age.
Also, the pegs are hardened.
The guitar has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 20426202
Truss Rod: 90° remaining on the tightening side
Fretboard: Fretboard height is present.
Low string height: 3.1mm above 12th fret
String height on treble string side: 2.8mm above 12th fret
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, neck heel gluing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
20426202

Truss Rod
90° remaining on the tightening side

Fret remaining
Fret height available

String Height Low String Side
3.1mm above 12th fret

High string height on treble string side
2.8mm above the 12th fret

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, neck heel gluing