USED FENDER CUSTOM SHOP / American Classic Stratocaster 1997 Refinish Sonic Blue [06]

Modern spec Strat with 2-point tremolo & 22F!
This model was introduced as the Custom Shop version of the American Standard series.

The rosewood fretboard has a 22F with a bird's eye maple neck, which is typical of the 90's Custom Shop. The fretboard has a 9.5-inch radius, medium jumbo frets, and a micro-tilt mechanism on the neck joint.
The body is made of ash judging from the graininess of the joint.
The PU is a Custom Shop black bobbin type, and the controls are volume, neck PU tone, and center PU tone.
A two-point tremolo unit is used, and the saddle is also a block type.

The entire body has many scratches, dents, paint cracks and chips, and uneven color burn.
Based on the shape of the back contour edge, dents, and the color under the PG, we have determined that this is an overall refinish.
The neck is slightly raised, but is generally straight and in good playing condition.
The frets have been refretted to the same size as the original.
The pots and condenser have been replaced, and the condenser is an orange drop type.
The original arm is missing and has been replaced with a non-stock one.
The strap pins were originally locking type but have been replaced with regular pins.
The certificate and original hard case are missing.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: CN506746
Year of manufacture: 1997
Country of manufacture: USA
Case: Soft case (not genuine)
Accessories: Arm (not genuine)
Weight: 3.66kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.2mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 2.06mm
Neck thickness near 12th fret: 22.2mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Alterations: Pots, condensers, strap pins, refret, refinish
Repairs and maintenance: Neck ironing, fret adjustment, strap pin replacement, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
CN506746

Year of manufacture
1997

Country of manufacture
United States of America

Case
Soft case (not genuine)

Accessories
Arm (not genuine)

Weight
3.66kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.2mm above 12th fret

String height on treble string side
1.6mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
2.06mm

Neck thickness near 12th fret
22.2mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modified parts
Pot, condenser, strap pin, refret, refinish

Repair and Maintenance
Neck ironing, fret adjustment, strap pin replacement, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment