USED FENDER JAPAN / ST62-140 EXTRAD Modified 3TS Made in 1986 [06]

The neck date is "12.11.86". This is a modified unit from the cavity of a Stratocaster belonging to the "EXTRAD" series, which was Fender Japan's top-of-the-line model at the time.
Shielding has been applied inside the cavity, with copper plates secured using adhesive and screws. Adhesive is heavily present throughout the interior, bonding the copper plates so firmly that they cannot be removed. It will be delivered in its current state.

The truss rod is at its maximum slack position. At this time, there is almost no impact on playability.
Wiring corrections, pickup height adjustment rubber replacement, and fret leveling have been performed.
The pickup selector knob has been replaced.
Scratches and paint cracks are visible on the headstock. A noticeable dented scratch is present on the fingerboard. Dented scratches and impact marks are visible on the neck back. Paint chips are present at the neck joint.
Numerous fabric-like pressure marks are visible on the body finish. The body has extensive scratches and dents overall, with paint peeling on the sides.
The pickguard shows playing scratches. Cracks are present around the screw holes on the control panel on the back of the body. Metal parts exhibit rust, tarnish, and pitting.
Overall, there are signs of use, but the condition is good.

Condition Grade: B+: Some scratches present, but no issues for normal use.

Serial Number: E733494
Year of Manufacture: 1986
Country of Manufacture: Japan
Case: Soft case
Accessories: Tonearm
Weight: 3.59kg
Truss Rod: Note: The truss rod is completely loose; currently no issues with the neck
Fret Depth: No issues; sufficient fret height
String Height (Low-String Side): 2.0mm above 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 42.0mm
Neck Thickness Near 1st Fret: 20.6mm
Neck Thickness at 12th Fret: 24.3mm
Scale length: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: .009-.042 set
Modifications: Switch knob
Repair/Maintenance: Switch knob replacement, wiring correction, fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment
Other: Shielding applied with copper plate inside the cavity

* As this is a used item, please note that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.

* Any measurements listed for truss rod, fret wear, string height, etc., were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee the same measurements upon arrival.

* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates may not occur in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.