USED FENDER USA / American Vintage 57 Stratocaster Black [06]

FENDER USA American Vintage 57 Stratocaster Black used is in stock now!
This model is a reproduction of the 1957 Stratocaster.
Alder body with maple neck and fingerboard.
Equipped with 3 original vintage pickups.

There is a paint crack and a paint chip near the body joint.
There is a slight bump on the back of the neck at the skunk stripe.
There is a cigarette burn mark on the 6th string side of the head.
There are many scratches on the front and back of the body, giving it a strong sense of use.
The instrument has been cleaned and adjusted after arrival and is in good playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: V050570
Country of manufacture: USA
Case: Hard Case
Accessories: Arm and manual
Weight: 3.72kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.9mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove filling adjustment

* Please note that this is a used instrument and there may be scratches, dents, etc. that do not show up in the photos or are not shown in the description. Please understand in advance.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
V050570

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm, instruction manual

Weight
3.72kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Rest of frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.9mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
24.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove filling adjustment