USED FENDER USA / American Original 50s Telecaster Butterscotch Blonde [06]

A used 2017, USA-made American Original 50s Telecaster is in stock.
It has a lacquer-finished ash body, maple neck, and maple fingerboard.
It features two Pure Vintage '52 single-coil Telecaster pickups and vintage-style hardware, including a brass 3-barrel saddle, reflecting the typical specs of the '50s models, but with the playability that modern players demand. It reflects the typical specs of the 50's models, but also has the playability that modern players are looking for.
Discoloration on the front and back of the head and some paint loss from the use of clip tuners.
The pickguard is one-ply, so there is some lifting due to aging.
There are also scratches and dents on the front and back of the body, and some metal parts are tarnished.
The instrument has been adjusted and cleaned at our repair center, so there are no problems with the playing surface.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: V1741318
Year of manufacture: 2017
Country of manufacture: USA
Case: Hard Case
Weight: 3.70kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, enough fret height
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 22.7mm
Neck thickness near 12th fret: 25.6mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V1741318

Year of manufacture
2017

Country of Manufacture
United States of America

Case.
Hard Case

Weight
3.70kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.2mm

Neck thickness near 1st fret
22.7mm

Neck thickness near 12th fret
25.6mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction