USED FENDER JAPAN / ST-CHAMP / Mini Guitar 3TS [06]

FENDER JAPAN ST-CHAMP / Mini Guitar 3TS Used is in stock now!
Manufactured by Fujigen from 1993 to 1994.
Compact size guitar with built-in speaker and amp and 9V battery for easy play anywhere.
Distortion mode can be set to get hard sound without any effectors.
Tremolo arm is missing.
There are some other minor scratches, dings, and dull metal parts, but this guitar is still ready to use.
It has been cleaned and adjusted after arrival, and there are no performance problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: Q016652
Country of manufacture: Japan
Case: Soft case
Weight: 2.85kg
Fretboard Height: Good, with sufficient fretboard height.
String Height Bass String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 37.3mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 25.4mm
SCALE: 535mm
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number Q016652

Country of manufacture Japan

CaseSoft case

Weight 2.85kg

No fret remainder problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 37.3mm

Neck thickness near the 1st fret: 21.8mm

Neck thickness 25.4mm near 12th fret

SCALE 535mm

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment