USED FENDER MADE IN JAPAN / Hama Okamoto Fender Katana Bass Black [06]

FENDER MADE IN JAPAN Hama Okamoto Fender Katana Bass Black Used in stock now!
Made in Japan in 2021.
The valuable model "KATANA" was produced from 1985 for a short period of time by Squier brand, and has been used on many stages with bold customization. Okamoto has been using "KATANA," a rare model produced only for a short period of time since 1985 under the Squier brand.
The model that completely recreates his characteristic customization is the "Hama? Okamoto's second signature model, produced for a limited time in 2021.
Basswood body, maple neck, and rose fingerboard.
Pure Vintage '63 Split Single-Coil Precision Bass pickups.
The trademark bridge cover and impressive original design pickguard have also been faithfully reproduced.
There is a buckle scratch on the body back.
There are some other minor scratches, dents, and dull metal parts, but it can still be used.
It has been cleaned and adjusted after arrival and has no playing problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD21016708
Year of manufacture: 2021
Country of manufacture: Japan
Case: Soft case
Weight: 3.01kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.4mm
SCALE: 813mm (32")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used instrument and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.