Skip to product information
1 of 16

USED GIBSON CUSTOM / 1964 ES335TD VOS Vintage Burst [06]

Serial Number : 131022

[SN 131022] USED GIBSON CUSTOM / 1964 ES335TD VOS Vintage Burst [06]

Item Code: 06-2800005110357
Condition: USED
Store: [06] shinjuku

Regular price ¥647,235 JPY
Regular price Sale price ¥647,235 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
The 1964 model is a re-creation of the 1964 model with a vintage look and feel!
The 1964 model features a sharp horn cutaway and an Authentic '64 Medium C-Shape neck that is slightly thicker than the '61 model.
The sound-defining maple center block has a cavity, which tends to give it more air than the 59 model.
The pegs are made with a Crewdson 2-cob, 1-row engraved design, and fine details such as block inlays and nylon saddles have also been pursued.
No solder marks, no electrical modifications, and Custombucker Alnico III (unpotted) are equipped, reproducing not only the looks but also the vintage-like sound.
The guitar has a VOS finish and some minor scratches, but it has been cleaned and adjusted after arrival.
Item Rank: B+: Some scratches, but no problem for normal use.

Serial number: 131022
Country of manufacture: U.S.A.
Case: Hard Case
Accessories: Certificate of Authenticity and Manual
Weight: 3.60kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 24.2mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.
ヴィンテージを限りなく追及し再構築した1964モデル!
1964モデルは、シャープなホーンカッタウェイ、61モデルよりわずかに厚みをもたせた、この年代ならではのAuthentic '64 Medium C-Shapeのネックを採用。
サウンドを決めるメイプルのセンターブロックにはキャビティがあり、59モデルと比較するとエアー感が増す傾向にあります。
ペグにはクルーソン2コブ・1列刻印仕様を採用、ブロックインレイやナイロンサドルといった細かいディテールも追及しております。
ハンダ修正跡見られず、電装系の変更なし、Custombucker Alnico III (Unpotted)を搭載しており ルックスだけでなく、サウンドに於いてもビンテージライクな味わいを再現しております。
VOS仕上げのほか細かいスレ傷ありますが入荷後クリーニング・全体調整済みです。
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: 131022
製造国: アメリカ
ケース: ハードケース
付属品: 認定書・説明書
重量: 3.60kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 42.7mm
ネック厚1フレット付近: 22.3mm
ネック厚12フレット付近: 24.2mm
スケール: 628mm (24.75")
RADIUS: 305mm (12")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・フレットすり合わせ

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4