USED FENDER JAPAN / JBR-93 Natural [06]

We've received a used FENDER JAPAN JBR-93!
This model was introduced as part of the PRO-FEEL series.
It features an ash body paired with a maple neck and maple fingerboard, and is equipped with an active circuit.
The controls consist of Master Volume, Pickup Balancer, Bass, and Treble. Both bands of the 2-band EQ offer boost and cut capabilities.

The body has been cut to allow for truss rod adjustment without removing the neck.
It is designed to be adjusted with a hex wrench.
The protective tape on the back panel is still attached and has become stuck.
There are signs of wear, including tarnished metal parts, scratches on the pickup covers, a dent on the 19th fret of the fingerboard, and chipped paint on the neck pocket. The frets appear to have been leveled and are now flat.
It has been cleaned and fully adjusted since arrival.

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: MIJP012974
Case: Soft case
Weight: 4.91 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal limits; fret height is sufficient for playing
String Height (Low String Side): 2.6 mm at the 12th fret
String Height (Treble Side): 2.6 mm at the 12th fret
Nut width: 38.6 mm
Neck thickness near the 1st fret: 20.9 mm
Neck thickness near the 12th fret: 24.7 mm
Scale: 864 mm (34")
RADIUS: 250 mm (approx. 9.8 inches)
Strings at Setup: .045–.105 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.