USED Fender USA / American Deluxe Stratocaster Crimson Trans/M [1998/3.90kg]

First period (1998-2003) Amedera. Fender American Deluxe Stratocaster, 1998.

The American Deluxe series was introduced in 1998, incorporating modern specs. It has an alder body, maple 1P neck with gloss around the head and glossless satin finish on the back of the neck and fingerboard, Vintage Noiseless Strat x 3 PU, Vol/front Tone/center and rear Tone, 2-point tremolo, locking pegs.

This is an early spec American Deluxe model without Full-UP Tone or heel cut, but it boasts high playability, and the silver logo on the head and avalon dot inlays are gorgeous.

The guitar is missing an arm, the shear-type strap pin has been replaced with a normal type, and there are some signs of use (color burn, scratches around the head and outer circumference, cracks on the back of the neck due to playing, scratches, picking marks, buckle marks, metal parts and screws are cloudy, bits and rust, etc.). There are some scratches and scuffs.

The fret board has been set up (cleaning, string replacement, rod adjustment) upon arrival, the fret board is slightly low but still high enough to play, and the truss rod can be tightened or loosened up to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: DN813560
Year of manufacture: 1998
Country of manufacture: USA
Case: Gig Case
Weight: 3.90kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height on bass string side: 2.0mm above 12th fret.
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 22.3mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modification: Rear tone pot replaced, strap pins replaced
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
DN813560

Year of manufacture
1998

Country of manufacture
U.S.A.

Case
Gig Case

Weight
3.90kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
20.7mm

Neck thickness near 12th fret
22.3mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modified parts
Rear tone pot replacement, strap pin replacement

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment