USED Fender Japan / TL62B-75TX OLB (Old Lake Placid Blue)(Made in Japan)[2004-06 / 3.61kg]

'62-style binding-wound custom Telecaster with Texas Special/Texas Special on the PU. This is a Fender Japan TL62B-75TX, made between 2004 and 2006.

It has an alder body, maple neck, slab-applied rose fingerboard, spiral bridge, and mint pickguard.

This guitar has a strong and pushy PU Texas Special, Alder/Rose midrange, and a tone with presence.

The 5/6 string pegs have been replaced, and the instrument shows signs of use (minor scratches and scuffs on the outer edge of the body, scratches and scuffs from playing, picking marks, buckle marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The guitar has been set up upon arrival (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, end pin screw replacement, and 6 string peg caulking correction), the fret board is high enough to play, and the truss rod is adjustable to ±60°. The truss rod is adjustable in the tightening and loosening directions and has been tested to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* Please note that there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: R072127
Year of manufacture: 2004-2006
Country of manufacture: Japan
Case: Soft case
Weight: 3.61kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, enough fret height.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.6mm
Neck thickness near 12th fret: 24.6mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modified: 5/6 string pegs
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, end pin screw replacement, 6 string peg caulking correction

Specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
R072127

Year of manufacture
2004-2006

Country of manufacture
Japan

Case
Soft case

Weight
3.61kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
21.6mm

Neck thickness near 12th fret
24.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Modified part
5/6 string pegs

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, end pin screw replacement, 6 string peg caulking correction