USED Fender / Classic Player Jaguar Special HH Olympic White Fender [4.00kg / 2013]

This stylish Fender (Made in Mexico) Classic Player Series Jaguar Special HH incorporates the style of yesteryear with the modern specs of 2 humbucker specs.

Alder body, maple neck, 24" scale/9.5R rose fingerboard, 42.1mm nut, 2 x Enforcer humbuckers, Kill SW/each hum-single blend control on the 6th string, and floating tremolo.

The short scale and HH pickup layout allows for a wide range of sounds, from powerful sounds to sparkling single sounds.

It shows signs of use (body color burn, scuffs and scratches, picking marks on the pickguard film, polishing marks on the control panel and joint plate, fogging, bits and rust on metal parts and screws, and other exterior damages). Please note that if you remove the pickguard film while it is still attached, it may leave adhesive residue.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod can be adjusted to tighten or loosen up to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* Please note that there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: MX13381755
Year of production: 2013
Country of manufacture: Mexico
Case: Gig Case
Includes: Arm
Weight: 4.00kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 22.9mm
SCALE: 610mm (24")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs & Condition

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
MX13381755

Year of manufacture
2013

Country of Manufacture
Mexico

Case
Gig Case

Accessories
Arm

Weight
4.00kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
22.9mm

Scale
610mm (24")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment