USED Fender USA / Eric Johnson Stratocaster Maple Fingerboard 2-Color Sunburst Fender [3.34kg]

This signature Fender Eric Johnson Stratocaster is a reproduction of Eric Johnson's favorite Stratocaster.

Deeply contoured 2-piece light alder body, candy-colored painted one-piece quarter-sawn soft V-shaped maple neck, especially Voiced Eric Johnson Single-Coil PU, front Tone/rear Tone control, lowered to the 1st string side, staggered pegs with no string guide, and original staggered pegs without string guide. The guitar is equipped with staggered pegs that lower toward the 1st string without string guide and the original joint plate.

This is a guitar that reflects the tone wizard Eric Johnson's attention to detail, with its beautiful melody and exquisite sound.

Since no string guide is used, there may be some string resonance in the head depending on the playing style. The guitar shows signs of use (paint chips at the joints, scratches and scuffs, picking marks, deflection characteristic of an 8-point pickguard, fogging and bits on metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut adjustment) upon arrival, the fret board is high enough to play, and the truss rod can be adjusted to +/- 60 degrees.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: EJ12109
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover
Weight: 3.34kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.57mm
Neck thickness near 1st fret: 22.34mm
Neck thickness near 12th fret: 24.65mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut adjustment

specs: .010-.046, .010-.046, .010-.046 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
EJ12109

Country of manufacture
United States of America

Case
Hard Case

Accessories
Arm, Bridge Cover

Weight
3.34kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.57mm

Neck thickness near 1st fret
22.34mm

Neck thickness near 12th fret
24.65mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut adjustment