USED ATELIER Z / L.E.S.-II Lower East Side II SSH BLK Atelier Z [3.48kg / 2019]

ATELIER ZL.E.S.-II (Lower East Side) is a cost effective model based on the L.E.S. used by Kosuke Saito of UNISON SQUAER GARDEN / XIIX.

It has an alder body, maple neck, rose fretboard, S-S-H layout with PUATELIER Z original ST-STDx2 & H-STD, 1Vol/2Tone/5Way selector specification.

This HSS model is based on the Lower East Side, which is consistently used as the main model, highly accurate and playable, and finished for real-world use.

The arm is non-original and shows signs of use (dents and scratches around the body, scratches, scuffs, playing marks, picking marks, buckle marks, fogging and pits on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 400619
Case: Soft case
Accessories: Arm (non-original)
Weight: 3.48kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 23.7mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
400619

Case
Soft case

Accessories
Arm (non-original)

Weight
3.48kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.4mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
23.7mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment