Skip to product information
1 of 17

USED Gibson USA / Les Paul Standard 2014 120th Anniversary Honey Burst [3.96kg/2014]

Serial Number : 14041577

[SN 14041577] USED Gibson USA / Les Paul Standard 2014 120th Anniversary Honey Burst [3.96kg/2014] Gibson [08]

Item Code: 08-2800003168343
Condition: USED
Store: [08] ikebukuro

Regular price ¥250,945 JPY
Regular price Sale price ¥250,945 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
120th Anniversary, beautiful AAA grade figured maple. Has been changed to normal pegs.

Gibson Les Paul Standard 2014. Non-pickguard figured maple top/mahogany back, slightly asymmetrical 1960s-style slim taper neck, compound radius fingerboard with "120th" inlay above the 12th fret, overbinding frets, Burst PU Bucker Pro 1 & 2, all knobs are Push-Pull with coil tap/phase out/direct out on each PU, truss rod cover with "ETune" logo (robot tuner Min-ETune has been removed).

It shows signs of use (minor scratches on the outside of the body, scuffs and wipe marks, picking marks, cracks on the truss rod cover/cracks inside the knob, cloudy/bitz/rust on metal parts/screws, and other exterior damage).

The fret board has been set up (peg replacement, fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment) upon arrival, the fret board is high enough to play, and the truss rod has been checked to 60 degrees left and right.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 14041577
Year of manufacture: 2014
Country of manufacture: USA
Case: Hard Case
Weight: 3.96kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 43.6mm
Neck Thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.8mm
SCALE: 624mm (24.56")
RADIUS: 241mm (9.5") - 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified part: Pegs (current GIBSON)
Repair and Maintenance: Peg replacement, fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
14041577

Year of manufacture
2014

Country of manufacture
United States of America

Case
Hard Case

Weight
3.96kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

Nut width
43.6mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
22.8mm

Scale
624mm (24.56")

RADIUS
241mm (9.5") - 305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modified parts
Pegs (current GIBSON)

Repair and maintenance
Peg replacement, fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
120th Anniversary、AAAグレードのフィギュアドメイプルが美しい一本。ノーマルペグへ変更済み。

ギブソンのレスポール・スタンダード・2014です。ノンピックガード仕様のフィギュアドメイプル・トップ/マホガニー・バック、若干非対称な1960年代スタイル・スリムテーパーネック、12フレット上に「120th」インレイが施されたコンパウンドラジアス指板、オーバーバインディング・フレット、PUはBurst Bucker Pro 1&2、ノブは全てPush-Pullで各PUのコイルタップ/フェイズアウト/ダイレクトアウト、「ETune」ロゴのトラスロッドカバーを備えています(ロボットチューナーMin-ETuneは撤去済み)。

使用感(ボディ外周に小キズ、スレや拭きスジ、ピッキング痕、トラスロッドカバーの亀裂/ノブ内部亀裂、金属パーツ/ネジ類の曇り・ビッツ・サビ、等々の外観ダメージ)が見られます。

入荷時にセットアップ(ペグ交換・フレットすり合わせ・クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整)済み、フレット山は演奏に問題ない高さがあり、トラスロッド左右60度まで確認済みで問題ない状態です。

商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: 14041577
製造年: 2014
製造国: アメリカ
ケース: ハードケース
重量: 3.96kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
ナット幅: 43.6mm
ネック厚1フレット付近: 21.0mm
ネック厚12フレット付近: 22.8mm
スケール: 624mm (24.56")
RADIUS: 241mm (9.5") - 305mm (12")
セットアップ時の弦: ERNIE BALL 2221 / .010-.046 set
変更箇所: ペグ(現行GIBSON製)
リペア・メンテナンス箇所: ペグ交換・フレットすり合わせ・クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
14041577

製造年
2014

製造国
アメリカ

ケース
ハードケース

重量
3.96kg

トラスロッド
問題なしロッド左右60度まで確認済みにて問題なし

フレット残り
問題なし充分なフレット高さあり

ナット幅
43.6mm

ネック厚1フレット付近
21.0mm

ネック厚12フレット付近
22.8mm

スケール
624mm (24.56")

RADIUS
241mm (9.5") - 305mm (12")

セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set

変更箇所
ペグ(現行GIBSON製)

リペア・メンテナンス箇所
ペグ交換・フレットすり合わせ・クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4