USED Gibson / 1976 The Ripper L-9S Natural [3.95kg/1976]

Gibson L-9S "The Ripper Bass" natural, made in 1976.

The Ripper Bass is a 70s Gibson bass along with the Glover Bass and others. Maple body, maple neck, maple fingerboard, Vol/Tone/Mid Control/4-point rotary SW (neck + bridge series/bridge/neck + bridge parallel/neck + bridge phase), 3-point bridge with back-through.

The Ripper bass is known for its wild sound, and its versatile sound variation is also an appealing feature.

The bottom of the nut has been raised, an unused hole has been added to the pickguard around the PU, and the PU screw heads have been licked. The strap pins have been changed. There are some signs of use (missing rod covers, bent/rattling pegs, color fading, scratches on the head end, dents around the perimeter of the body, paint peeling off the side of the fingerboard, paint bumps on the back of the head and joints, minor scratches and scuffs, scuffs and play marks, picking marks, metal parts and screws are cloudy, bits and rust, and other exterior damage). There are some exterior damage. Hard case hardware x1 is broken.

The tuning strings are not super long strings, so only the 4th string is top-loaded. The fretboard has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment, neck ironing, and fret adjustment) upon arrival.

* This is a used item, only one of the actual item is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 00 156377
Year of manufacture: 1976
Country of manufacture: USA
Case: Hard Case
Weight: 3.95kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 40.2mm
Neck Thickness near 1st fret: 20.76mm
Neck thickness near 12th fret: 25.46mm
SCALE: 864mm (34")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, and fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
00 156377

Year of manufacture
1976

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.95kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

Nut width
40.2mm

Neck thickness near 1st fret
20.76mm

Neck thickness near 12th fret
25.46mm

Scale
864mm (34")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, and fret adjustment