USED Fender Custom Shop / 2020 American Custom Series Stratocaster NOS Crimson Transparent [2020/3.70kg]

American Custom (AMERICAN CUSTOM) series N.O.S. Stratocaster.

Fender Custom Shop American Custom Stratocaster Rose fretboard model. All lacquer finish, ash body with heel-cut joint, "'60s Oval "C"" shape "AAA" grade flame maple neck, rose fingerboard, Avalon inlays, hand-wound PU. Dual-Mag" (center reverse), Greasebucket Tone Circuit, Spurzel pegs with pearl buttons, vintage-style tremolo, and JimDunlop strap locks.

Combining classic Fender design with the modern craftsmanship of the Custom Shop, this model combines modern specs with traditional style.

There are several round holes in the body that have been filled in since production. It shows some signs of use (scratches, play marks, picking marks on the pickguard film, fogging of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) upon arrival, the fret board is high enough to play, and the truss rod can be tightened or loosened up to ±60°.

* The truss rod can be adjusted to ±60° in the tightening and loosening direction.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 11541
Year of manufacture: 2020
Country of manufacture: USA
Case: Hard Case
Accessories: Certificate, arm, wrench, strap, strap lock pin, case key
Weight: 3.70kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 42.1mm
Neck Thickness near 1st fret: 20.1mm
Neck thickness near 12th fret: 23.8mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5") - 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 11541

Year of manufacture 2020

Country of manufacture USA

CaseHard case

AccessoriesCertificate, arm, wrench, strap, strap lock pin, case key

Weight3.70kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remaining problem, sufficient fret height

Nut width 42.1mm

Neck thickness: 20.1mm near the 1st fret

Neck thickness 23.8mm near 12th fret

Scale 648mm (25.5")

RADIUS241mm (9.5") - 305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment