USED Fender USA / 1979 Stratocaster Sunburst/R [3.95kg/1979]

This Fender Stratocaster Rose fretboard version is a 1979 (S9) serial, large head with Bullet truss rod cap, ash body with 3-point joint, and F-key pegs, all of which reflect strong 70s characteristics.

Grey bobbin PU and parts are 1979 Stratocaster with 1978 5-way selector, fretboard surface correction/refret, and nut replacement.

There are some minor scratches and scuffs around the body, guitar hanger marks on both sides of the head, cloudy metal parts, and rust on the bits and screws, but it has a tight and clear tone with an ash body.

The case is non-original and lacks the arm. The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, refretting, nut replacement, and de-fretting) upon arrival.

* The truss rod is adjustable to tighten or loosen, and the truss rod is adjustable to ±60°.
* Please note that this is a used item and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: S918440
Year of manufacture: 1979
Country of manufacture: USA
Case: Hard Case
Accessories: None
Weight: 3.95kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, fret height is sufficient.
Nut width: 41.4mm
Neck Thickness near 1st fret: 23.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, refretting, nut replacement, and de-burring.

* Please note that this is a used instrument and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to the effects of climate, humidity, and other environmental differences.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number S918440

Year of manufacture 1979

Country of manufactureUnited States

CaseHard case

No accessories

Weight 3.95kg

No truss rod problem, rod is fine, checked up to 60 degrees to the left and right

No fret remaining problem, enough fret height

Nut width 41.4mm

Neck thickness 23.0mm near the 1st fret

Neck thickness 24.5mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, refretting, nut replacement, and gouge removal