USED Fender USA / American Deluxe Stratocaster N3 Rosewood Fretboard Olympic Pearl [3.92kg / 2011]

This Amedela Strat has features such as N3 noiseless PU, locking pegs, heel-less processing at the joint, and S-1 switch.

Fender American Deluxe Stratocaster with N3 pickups, made in 2011. Alder body, maple neck, compound radius (9.5R-14R) rose fingerboard, medium jumbo frets, two-point tremolo with pop-in arm system.

This guitar boasts a good fit, excellent playability, and a variety of sound variations with various PU selections by the S-1 switch.

There are some signs of use (color burns, paint chips on the side of the bridge, minor scratches and scuffs, scuffs and scratches, picking marks, fogging, bits and rust on metal parts, etc.).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

* The truss rod is adjustable to tighten or loosen, and the truss rod is adjustable to ±60°.
* Please note that this is a used item and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: US11278785
Year of manufacture: 2011
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, wrench, lock pin hardware
Weight: 3.92kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.9mm
Neck Thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.1mm
Scale: 648mm (25.5")
RADIUS: Compound Radius 241mm (9.5") - 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number US11278785

Year of manufacture 2011

Country of manufactureUSA

CaseHard case

AccessoriesArm, wrench, lock pin hardware

Weight3.92kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret rest problem, sufficient fret height

Nut width 42.9mm

Neck thickness 21.0mm near the 1st fret

Neck thickness 22.1mm near 12th fret

Scale 648mm (25.5")

RADIUSCompound Radius 241mm (9.5") - 356mm (14")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction