USED Gibson USA / Les Paul Classic Heritage Cherry Sunburst [4.49kg / 1997]

This is a 1997 Gibson Les Paul Classic, which became popular for its vintage-style Cruson pegs and nickel parts, as opposed to the Les Paul Standard, which used modern specs from 1989-90.

It has a plain maple top, mahogany back, mahogany neck, candy-colored position marks on the rose fingerboard, 1960-described pickguard, bush-type Cruson pegs, Weier ABR bridge, and open-type 496R & 500T PUs.

The tight sound of the non-chambered body and slim grip make this a model that many are looking for.

It shows signs of use (color fading, body end stand burn, minor scratches and scuffs, scuffs and play marks, picking marks, dents on the back of the neck in the low position, cracks inside the knobs, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the truss rod has been checked to 60 degrees left and right.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 7 1267
Year of manufacture: 1997
Country of manufacture: USA
Case: Hard Case
Weight: 4.49kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 43.0mm
Neck Thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.1mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 7 1267

Year of manufacture 1997

Country of manufactureUSA

CaseHard case

Weight 4.49kg

No truss rod problem.

No fret remainder problem, sufficient fret height

Nut width 43.0mm

Neck thickness: 20.8mm near the 1st fret

Neck thickness 23.1mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment