USED Paul Reed Smith (PRS) / 35th Anniversary Custom 24 10-top Pattern Regular Emerald [3.35 kg / Manufactured in 2020]

This is a Paul Reed Smith (PRS) 35th Anniversary Custom 24 10Top, manufactured in 2020.

Based on the flagship Custom 24 model, this limited-edition version features the two-coil-tap switches that were first introduced on the “Paul’s Guitar” and became a hot topic.

It features an archtop 10Top flame maple top and mahogany back, a mahogany neck in a Pattern Regular shape, a Pre-factory Small Eagle inlay on the headstock, an Avalon Old School Birds inlay on the fingerboard, and Phase III tuners.

It is equipped with 85/15 TCI (Tuned Capacitance and Inductance) pickups, which provide a more cohesive sound than previous models and offer improved clarity.
The finish features the lacquer finish introduced with the 2020 model.

While adhering to the original specifications, Paul’s Guitar has made musical improvements, resulting in a guitar that boasts a wide variety of sounds thanks to its two-coil tap switches.

Signs of use are visible, including scuffs, wipe marks, dings on the body edges, picking marks, and tarnish on the metal parts. It was set up upon arrival (cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment, and fret leveling). The truss rod can be adjusted in both directions and has been tested to operate up to ±90°.

The classic combination of a top-grade, dazzlingly figured maple top and an emerald-colored finish makes this an absolutely superb instrument!

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: 0299347
Year of Manufacture: 2020
Country of Manufacture: USA
Case: Hard Case
Accessories: Arm, wrench, spec tag, instruction manual
Weight: 3.35 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.5 mm
Neck Shape: Pattern Regular
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 23.5 mm
Scale: 635 mm (25")
Radius: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates are not always made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.