YAMAHA / BB734A Dark Coffee Sunburst (DCS) [10]

Miter bolting for strong neck adhesion
In addition to the four screws that secure the neck vertically from the back of the body, two screws are added to secure the neck end at a 45-degree angle from the back of the body to create a miter bolting system. The body and neck are tightly adhered to each other, creating an intense sound that unites the body and neck. The energy loss of string vibration is less than that of a normal bolt-on joint, resulting in rich sustain and overwhelming body sound.
Newly developed pickup YGD Custom V7
Newly developed pickups. Equipped on the 700 grade and Pro grade.
Active Circuit
The new BB 700 grade has an active circuit and a passive circuit that can be switched at the touch of a switch. The active circuit is adjusted for the new BB with good grain. Furthermore, the treble knob of the 3-band equalizer is delicately designed so that no volume difference occurs when switching, even though it functions as a master tone control when using the passive circuit. Natural tone adjustment allows smooth, stress-free switching. High-quality gold-plated parts are used to prevent contact failures and deterioration of sound quality. Battery alert LED on the back panel warns when to change batteries by lighting a lamp, preventing sudden battery failure on stage.
Convertible type bridge and saddle
The 700 and Pro grades feature "string-through-body" construction, in which the strings are passed through from the backside of the body. Compared to the conventional method where the strings are passed vertically through the back of the body, the strings are passed at a 45-degree angle, which transmits the energy of the string vibrations to the body without any loss. In the general method of passing strings through the back of the body from directly under the saddle, there is a large loss of string vibration at the plate and saddle, making it difficult to transmit string vibrations efficiently and reliably. The different contact points of the semi-circular saddle allow for a variety of player expression, from crisp and clear sounds to warmer tones. The brass saddles of the Vintage Plus bridge provide a deep bass sound, while the steel plates provide a bright sound. Metal parts such as springs and screws are made of stainless steel for resistance to rust and corrosion.
* Long scale strings are recommended when stringing from the front side to the bridge, and super long scale strings are recommended when stringing from the back side of the body.
Accessories: gig bag included, wrench, manual
Serial number: IKX254156
Weight: 4.32kg

Body/neck construction: Miterbolting
Scale: 863.6mm
Fingerboard: Rosewood
Fingerboard radius: 250R
Number of frets/size: 21
Body: Alder & Maple & Alder 3-ply
Neck：Maple & Mahogany 5 Piece
Bridge：Vintage Plus Light (steel plate/steel saddle)
Pitch between strings: 19mm
Pickup: YGD V7 P/J (Alnico V)
Controls: Master Volume, Pickup Balancer, 3-Band Equalizer (Bass, Middle, Treble) Active/Passive Switch
Strings: D'Addario EXL170
Nut material/width: GraphTech/4 strings: 40mm

SPECS

Body/Neck Construction
Miterbolting

Scale
863.6mm

Fingerboard
Rosewood

Fingerboard radius
250R

Number of frets/size
21

Body
Alder & Maple & Alder 3-Ply

Neck
Maple & Mahogany 5 Piece

Bridge
Vintage Plus Light (steel plate/steel saddle)

Pitch between strings
19mm

Pickups
YGD V7 P/J (Alnico V)

Controls
Master volume, pickup balancer, 3-band equalizer (bass, middle, treble), active/passive switch

Strings
D'Addario EXL170

Nut Material/Width
GraphTech/4 strings|40mm