USED Martin / 0-18 1971 [10]

Made in 1971, the 0-18 sounds full of flavor!

Despite its small size, the 0-18 has about 5mm thicker body than the 00 and 000, which gives it sufficient volume and flavor.
The body top is made of spruce and sides and back are made of mahogany. The scale is about 632mm, nut width is about 43mm, and the pegs are the original Pat Pend Grover, although there are some marks on the pegs where they were put on in the past.

There is a well-known Martin crack on the pickguard, but it has been patched on the back side. There is a 4cm paint crack on the left neck of the body top. There is also a surface crack of about 3 cm on the lower right side of the body. There is a crack of about 5 cm on the side of the body strap pin, which has been glued to the back side of the body, although there is no patch. In order to make it less noticeable, the entire body has been over-lacquered. The nut, frets, saddle, and pickguard have been replaced.

The neck is in good condition. The truss rod is SQ and is not adjustable. The frets are in good condition with no noticeable string marks and about 60-70% remaining. Currently, the string height is adjusted at about 3.0mm on the 6th string (12F) and about 2.0mm on the 1st string (12F). The saddle height is low and there is no margin for adjustment here.

Overall, there is over-lacquer all over the instrument, but it is in good condition for its age. The small body makes it easy to play a little, and the volume and chill sound are more than enough for this size! This is one you should definitely choose!

Neck condition is fine.
The truss rod can be adjusted to tighten or loosen.
About 60-70% frets left.
Country of OriginMade in USA
CaseNon-genuine hard case (00 size, needs to be adjusted with cloth, etc.). The string is broken and the lid can be opened fully.)
Attachment
Item rank B+: Some scratches, but no problem in normal use.
Serial number 276202