USED YAMAHA / FG-180 Red Label 1969-1970 [10]

Item rank: B+: Some scratches, but no problem in normal use
Serial number: 1110668
Year of manufacture: circa 1970
Country of manufacture: Japan
Case: non-genuine soft case
Accessories: None
Weight: -5 lbs.
Truss Rod: Note: Neck is currently fine at the rod limit.
Fret Remaining: Note: Still can withstand cutting, but the frets are low.
String Height (Bass String Side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: approx. 44.0mm
Neck Thickness (near the 1st fret): -5.0mm
Neck thickness (near 12th fret): -
SCALE：approx. 634mm
RADIUS: -
Setup Strings: Galli Strings / .012-.054 set
Modified parts: -
Repair/Maintenance: Cleaning, string replacement, rod adjustment, and alignment
Other: Total overhaul by a professional repairman. The nut was replaced with an unbleached oil-bone nut, the original peg mounting screws were replaced, and the original bridge was reshaped (due to the nature of the work, it is thought that the bridge was removed, reshaped, and then reattached. When the strings are tuned, a small gap can be felt around the perimeter of the bridge, but it seems as if a glue allowance was made when the glue was applied to re-glue the bridge). The original saddle and the original saddle have been processed for aggressive string height adjustment, and the entire body has been overcoated after preparing the paint film fabric (a thin paint film has been well spray-formed on the pickguard, which seems to be a fabrication replacement), and the instrument may be ready for immediate play. (Original truss rod cover is missing.)

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including accessories.
* If there are any problems during the final check before shipping, we will inform you separately.

specs

Item Rank
B+: Some scratches, but no problem in normal use

Serial No.
1110668

Year of manufacture
Around 1970

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
None

Weight
-Weight

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
Note: Still good for cutting, but the frets are low.

String Height (Bass String Side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
Approx. 44.0mm

Neck Thickness (near 1st fret)
-Neck Thickness (near 12th fret)

Neck Thickness (near 12th fret)
Neck Thickness (near 12th fret) - Neck Thickness (near 12th fret)

Scale
Approx. 634mm

RADIUS
-RADIUS

Setup Strings
Galli Strings / .012-.054 set

Modification
RADIUS - Repair and Maintenance

Repair and Maintenance
Cleaning, string replacement, rod adjustment, and alignment

Other
The instrument has undergone a total overhaul by Professional Repair. The nut has been replaced with an unbleached oil-bone nut, the original peg mounting screws have been replaced, and the original bridge has been reshaped (due to the nature of the work, it is believed that the bridge was removed, reshaped, and then re-glued. When the strings are tuned, a small gap can be felt around the perimeter of the bridge, but it seems as if a glue allowance was made when the glue was applied to re-glue the bridge). The original saddle and the original saddle have been processed for aggressive string height adjustment, and the entire body has been overcoated after preparing the paint film fabric (a thin paint film has been well spray-formed on the pickguard, which seems to be a fabrication replacement), and the instrument may be ready for immediate play. (Original truss rod cover is missing).