USED Gretsch / G6134-CG-FSR Penguin 2014 [10]

The G6134 "Penguin" in a rare Cadillac Green color!
The G6134-CG-FSR Penguin 2014 has arrived!
Based on Gretsch’s iconic “G6134 White Penguin,” this guitar was released as a limited-edition FSR (Factory Special Run) model.
The color scheme is quintessentially Gretsch, evoking images of luxurious American cars.
The “Cadillac Green” finish truly evokes the atmosphere of the good old days of America in the ’50s and ’60s.
The control section carries on the traditional Gretsch design, featuring three volume controls (front, rear, and master), one tone control, and a 3-way selector switch. In the mix position, you can create a wide variety of classic Gretsch sounds by blending the signals from both pickups.
The large V-shaped headstock, gold hardware, and large, glittery orange plastic parts complement the “Cadillac Green” color perfectly, creating a look that’s truly eye-catching.
Its distinctive driven sound is another of Gretsch’s charms. Please take this opportunity to experience the look and sound that have captivated and been cherished by artists around the world!
There is a chip on the top of the headstock caused by an impact, a linear scratch on the body end, and some fine scratches on the back of the neck and elsewhere; however, considering that it was manufactured over 10 years ago, it is in clean condition with a solid gloss and retains its luster.

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: JT14073060
Year of Manufacture: 2014
Country of Manufacture: Japan
Case: Hard Case
Accessories: Owner’s Card, box wrench, HC key
Weight: 4.01 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.5 mm
Neck thickness near the 1st fret: 21.3 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 625 mm (24.6")
Radius: 254 mm (10")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.