USED Gibson USA / Les Paul Standard 2010 Limited Fireball Finish [11]

Gibson's Les Paul Standard Limited with customization befitting a limited edition model.
It is constructed with AA grade flame maple top, A grade chambered mahogany back, mahogany neck, and ebony fingerboard.
The look is a mix of Les Paul Standard and Les Paul Custom, plus a P-90H pickup on the front, which is one of a kind. The rear pickup is a Burstbucker 3, and it is equipped with modern elements such as a jack lock.
The lightweight body makes it easy to handle, and the chrome truss rod cover engraved with "Les Paul," the pickup layout combined with block inlays and binding, and other features make this a one-of-a-kind Les Paul.

This guitar has been modified to normal specifications due to the unavailability of Robot Guitar use. Knobs and cavity panel are installed by Gibson. Scud film type capacitor is installed.
There are some scratches and dents, but there are no noticeable damages.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 126000516
Year of manufacture: 2012
Country of manufacture: USA
Case: Original hard case
Weight: 3.45kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 23.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, peg replacement [by Grover], tune-o-matic replacement [by Gibson], stop tailpiece replacement [by Gibson], 4 knobs [by Gibson], cavity panel [by Gibson], electrical repair Gibson], electrical repairs (tone pots x 2 [Gibson], capacitors [SCUD], wiring materials)

Specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
126000516

Year of manufacture
2012

Country of manufacture
United States of America

Case
Genuine hard case

Weight
3.45kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
23.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, peg replacement [by Grover], tune-o-matic replacement [by Gibson], stop tailpiece replacement [by Gibson], 4 knobs [by Gibson], cavity panel [by Gibson], electrical repair (tone pots x 2 [Gibson], capacitors [SCUD], wiring materials)