USED CHANDLER / PC-TE Orange [11]

Rare Chandler Telecaster type model from the 90s.
It has an orthodox Telecaster shape, but semi-hollow construction with a spruce top and mahogany back.
The front humbucker can be coil-tapped by pulling the tone pot. The specifications are traditional in appearance, but with attention to detail.

Overall, there are many scratches, dents, and peeling paint.
The high frets are a little tight due to the high neck and low frets.
Front pickup: Model unknown, Rear pickup: Dimarzio DP384

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: Non-genuine soft case
Weight: 3.63kg
Truss Rod: No problem, checked up to 60 degrees left and right.
Fret rest: Fret rest is defective and needs to be replaced at the time of next repair.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 19.7mm
Neck thickness near 12th fret: 21.3mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B: Fairly scratched and worn, but no problems in normal use.

12 months old

Case
Non-genuine soft case

Weight
3.63kg

Truss Rod
No problem, as confirmed up to 60 degrees to the left and right of the rod (with some waviness and high spring).

Fret remainder
Defective, need to consider replacing the frets at the next repair.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.3mm

Neck thickness near 1st fret
19.7mm

Neck thickness near 12th fret
21.3mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing