USED Sonido / SW-I [11]

This is an all handmade model by Guitar Craft Workshop Sonido, located in Nagoya City, Aichi Prefecture, Japan.
This model was made in 2005 using a very elaborate construction method with a "hollowed-out structural body" machined by Sumio Yamamoto, which he arrived at after many years of guitar making.
It is believed to have a solid spruce top, a body machined from 1-piece Iroko wood, a 1-piece maple neck, and a rosewood/fingerboard.
The head has a frog design dug into it.
Despite its small size, it is a well-designed piece with good sound and design.

There are some signs of use such as minor scratches and small dents.
There are some paint chips near the top side of the body and a few scratches near the neck joint.
There is a crack at the end of the body that has been repaired.
There is a small amount of remaining truss rod looseness, but there is no noticeable abnormality on the neck, so there are no problems with the playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Year of manufacture: 2005
Country of manufacture: Japan
Case: Non-authentic soft case
Truss Rod: No problem, with a note that the rod has been checked to 60 degrees to the left and right (not much left).
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.2mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 44.7mm
Neck thickness near 1st fret: 22.8mm
SCALE: 643mm (25.3")
RADIUS: 406mm (16")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, bridge repositioning

Specs: .012-.053

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Year of manufacture
2005

Country of manufacture
Japan

Case
Non-genuine soft case

Truss Rod
No problem (not much left)

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.2mm above the 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
44.7mm

Neck thickness near 1st fret
22.8mm

Scale
643mm (25.3")

RADIUS
406mm (16")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, bridge repositioning