USED Music Man / Sabre II MOD Sunburst [11]

A 1979 SABRE II is now in stock.
This is a 1979 SABRE II, a mainstay model before Ernie Ball/Musicman.
The year of manufacture is determined from the neck & body date and pot date ('79 x 2, '78 x 1).
It has a white ash body, one-piece maple neck with 22 frets, and a 3-point neck joint like other Fenders of the same age.
It is equipped with two original humbuckers and has a built-in active preamp.
The controls include a master volume, treble control, bass control, bright switch, and phase switch, allowing for a wide range of tones from sharp to powerful.
Originally designed as a hardtail, it has been boldly replaced with a GRECO GO series bridge, and the body has been cavity-machined accordingly.
There are paint reactions around the end of the body, and there are some minor scratches and dings scattered throughout the body as well.
The battery snap has been replaced, and the battery box lid has been newly made from aluminum.
Although there are some modifications and signs of use, the playability is good as the parts have been replaced, maintained, and cleaned at our affiliated repair shop/ in-house repair center.
The original hard case is included, but there are many scratches, peeling of synthetic leather, stickers, and other signs of use.

Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial number: A006458
Year of manufacture: 1979
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 4.05kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.8mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 23.7mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problems in normal use.

Serial number A006458

Year of manufacture 1979

Country of manufactureUnited States

Case Genuine hard case

AccessoriesArm

Weight4.05kg

Truss RodNo problemRod checked up to 60 degrees left and right, no problem.

Fret RemainingCautionThe frets are low and can still withstand cutting.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 40.8mm

Neck thickness near the 1st fret 20.7mm

Neck thickness near 12th fret 23.7mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment