USED FERNANDES / The Function FST-60 Candy Apple Red [11]

1990's Function series, high cost performance model.
Fernandez original twin-blade pickups are mounted on the front and center pickups, and a humbucker is mounted on the rear pickup. Coil taps for each pickup are employed, and together with the 5-way selector, a wide range of sound creation is possible.
Constructed with maple body, maple neck, and rose fingerboard.

The center pickup is slightly quieter than usual because the height of the center pickup can hardly be raised by turning the screw and the distance between the center pickup and the strings is further than usual due to the built-in angle.
When the fine tuners are set to the middle position, the saddle is angled in the opposite direction and the contact between the strings and the saddle is not good, resulting in a strange noise.
If repaired, the fretboard will need to be refretted.
Overall, there are scratches, dents, and rust on the metal, and it shows signs of use.
The neck is slightly twisted. there is some chattering on the 4-string live sound.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Year of manufacture: 1990
Case: Non-authentic soft case
Weight: 3.96 kg
Truss Rod: Note: Rod has been checked up to 60 degrees to the left and right, no problem.
Fretboard: Defective, need to consider replacing next time when repairing.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 19.6mm
Neck thickness near 12th fret: 22.0mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

Specs: Percentage (%)

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Year of manufacture
1990

Case
Non-genuine soft case

Weight
3.96kg

Truss Rod
No problem (torsion and waviness)

Fret remainder
Defective, need to consider replacing the frets at the next repair

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
19.6mm

Neck thickness near 12th fret
22.0mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair