USED Fender / Made in Japan Heritage 60s Jazzmaster 3 Tone Sunburst [11]

Heritage Series supervised by Custom Shop master builder Mark Kendrick.
This Jazz Master features an alder body and maple neck with rosewood fingerboard and lacquer finish.
This one was carefully crafted to achieve classic playability and sweet vintage tones.

There are some scratches and dings, but nothing noticeable.
The neck is near straight and in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: JD23005019
Year of manufacture: 2023
Country of manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.51kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.7mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
JD23005019

Year of manufacture
2023

Country of manufacture
Japan

Case
Genuine soft case

Accessories
Arm

Weight
3.51kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.3mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
24.7mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment