USED Burny / FTV-90 M Mahogany Brown [11]

The FTV-90 M was released in the early 1970s under the Burny brand of Fernandez.
This instrument is one of the rare mahogany brown finish pieces. The wood grain and the deep color are beautiful, and it has a vintage look and feel.
The body and neck are made of high-quality mahogany, and rosewood is used for the fingerboard. Two P-90 type pickups are equipped, and its powerful yet subtle sound is favored by a wide range of players regardless of genres. When played clean, the tone is glossy and deep, and when driven, a fat and clear midrange comes out in front. Its presence stands out both in chord backing and solo work.
The control system consists of the orthodox 2 volume, 2 tone, and 3-way selector. The bridge is a wraparound type with a vintage feel, which provides excellent performance in terms of sustain and response. The pickguard has a tortoiseshell pattern, giving it a classic look.
There are some minor scratches, dents, rust, and paint deterioration, showing signs of use commensurate with its age.
The neck is slightly wavy, but the frets have been fretted and are in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Case: Hard Case
Weight: 3.63kg
Truss Rod: No problem, rod has been checked up to 60 degrees to the left and right.
Fretboard: note that the frets are low, but can still be cut.
String Height Low String Side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.3mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Case Hard case

Weight 3.63kg

No truss rod problem.

Fret remainderCaution: Still can withstand cutting, but the frets are low.

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near the 1st fret: 21.8mm

Neck thickness near 12th fret 24.3mm

Scale 628mm (24.75")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment