USED Fender Japan / ST62-AS 40th Anniversary Shoreline Gold [11]

Made in 1994, this model was produced in a limited edition to commemorate the 40th anniversary of the Stratocaster.
Based on the ST62, this model was finished to anniversary specifications.
The Shoreline Gold finish is a rare color that is rarely seen in the market.
The serial number S009332 is engraved on the neck joint, confirming that it was made in 1994.
With the elaborate construction and stable playability that can only be achieved with a Japanese-made instrument, this is one that responds well to actual playing. You will enjoy the unique charm of this anniversary model that combines value as a collection and practicality as a player.
Metal parts are dull. There are scratches on the joint plate.
There are cracks in the corner screw holes on the back panel.
The body has few scratches and is in relatively clean condition.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: S009332
Year of manufacture: 1994
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.61kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 25.0mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number S009332

Year of manufacture 1994

Country of manufacture Japan

CaseNon-genuine soft case

AccessoriesArm

Weight3.61kg

No truss rod problemNo problem, confirmed up to 60 degrees to the left and right of the rod

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.8mm

Neck thickness near the 1st fret: 21.8mm

Neck thickness 25.0mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment