USED Tokai / Talbo Blazing fire [11]

Original "Talbo" model with Tokai's original aluminum alloy body is in stock!
It is believed to be a model produced after 1996 with silver color Tokai BLAZING FIRE logo.
The back plate is fastened with 6 screws and Talbo black logo.
Aluminum body with maple neck and rosewood fingerboard.
The pickups are SSS array, which is a model with specifications rarely seen in the market.
There are some scratches and dents on the body, which are commensurate with its age.
The center pickup has been replaced with GOTOH PICKUPS ST-Custom/M.
The locking pin has been replaced with a locking pin, but the strap side parts are not included.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: Soft case
Weight: 3.86kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, fret adjustment

* The truss rod, fretboard rest, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Case
Soft case

Weight
3.86kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.7mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
22.5mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, fret adjustment