USED Fender USA / American Standard Stratocaster Mod -1989- Gun Metal Blue [11]

Fender American Standard Stratocaster made in 1989 is in stock.
Alder body with maple neck, 2-point tremolo, 22 frets, and 9.5" radius.
This model has modern specs suitable for each era without losing the traditional atmosphere.
Lacking arms.
It was activated at the time of purchase, and the electrical components have been changed to make it passive again. All electrical components have been replaced except for the selector.
The mounting screw hole on the 6th string side of the front pickup has been widened and one larger size screw has been installed.
Front and center pickups are FAT50s. Rear pickup is model unknown.
The base is gunmetal blue but has turned green due to aging. The paint near the jack is reacting.
There are some scuffs and dings.
The neck is slightly twisted, but there are no problems with playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: E912284
Year of manufacture: 1989
Country of manufacture: USA
Case: Non-authentic soft case
Accessories: * Arm missing
Truss Rod: No problem (with a note that the rod has been checked up to 60 degrees to the left and right).
Fretboard: No problem, fretboard height is high enough.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, burr removal, and alignment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
E912284

Year of manufacture
1989

Country of manufacture
U.S.A.

Case
non-genuine soft case

Accessories
* Arm missing

Truss Rod
No problem (slight waviness)

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.5mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
22.5mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, burr removal, and alignment