USED Fender Japan / ST71-140YM YJM PU Yellow White [11]

Ingway Malmsteen Signature Model
The Stratocaster that gave shape to Ingway's idea. Basswood body with characteristic scalloped finish and maple neck with jumbo frets.
YJM DP-217 jointly developed by Dimarzio and Ingway is mounted on the front and rear, and HS-3 DP-117 on the center.
There are scratches, dents, dull parts, rust, and other signs of use.
There is a sticker on the body back.
The neck is in good playing condition with no abnormalities and has been adjusted with a slightly lower action.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: O032057
Year of manufacture: 1997-2000
Country of manufacture: Japan
Case: Original gig case
Accessories: Arms, Back Panel
Weight: 3.46kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 1.7mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 19.9mm
Neck thickness near 12th fret: 22.3mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
O032057

Year of manufacture
1997-2000

Country of manufacture
Japan

Case
Genuine gig case

Accessories
Arm, Back Panel

Weight
3.46kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Rest of frets
No problem, there is enough fret height

String Height Low String Side
1.7mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.0mm

Neck thickness near 1st fret
19.9mm

Neck thickness near 12th fret
22.3mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment