USED Fender Custom Shop / Limited 1959 Special Journeyman Relic Stratocaster Shell Pink [11]

Limited Order Limited 1959 Special Stratocaster model made in 2018!
The lacquered shell pink body with journeyman relics such as weather checks and peeling neck coating has a used vintage stippled look that is very Fender Custom Shop.
Wood materials are probably two-piece alder body, superb flame maple neck with deep grain exactly up to the head, and beautiful slab-applied rosewood fingerboard. Hand-wound Ancho Poblano Strat single coil pickups are mounted. This pickup is named after a Mexican pepper, and as the name suggests, it has a spicy and hot sound. Controls are master volume and master tone blender.
This is a superb product that will satisfy you in every way, from looks to sound to playability.
The guitar is a reliced instrument, so any new signs of use cannot be determined.
The imo screws on the 5th and 6th string saddles were rusted and the wrenches could not fit in the hex holes, so three imo screws have been replaced.
There is no noticeable abnormality in the neck, and there are no problems with the playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: CZ537133
Year of manufacture: 2018
Country of manufacture: USA
Case: Original hard case
Accessories: Arm certificate, strap
Weight: 3.46kg
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
CZ537133

Year of manufacture
2018

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Arm Certificate Strap

Weight
3.46kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
19.8mm

Neck thickness near 12th fret
24.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment