USED Gibson / 1973 ES-335TD Cherry [11]

In stock is a vintage Gibson ES-335TD in beautiful condition, made in 1973 at the Kalamazoo factory.
This is a thinline body, mahogany neck period.
Lacquered laminated maple body with familiar f-holes and short maple center block, volute mahogany neck and rosewood fingerboard. The pickups are two sticker-numbered PAFs.
The original is believed to have been retained except for the Tune-o-matic.
The tune-o-matic has been replaced with a TonePros AVR-II.
There is a small paint chip on the body back.
Paint has transferred to the neck binding.
There are some minor scratches, but the metal parts are not too dull and are quite clean considering the age.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 123036
Year of manufacture: 1973
Country of manufacture: USA
Case: Hard Case
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.8mm
Neck thickness near 1st fret: 19.5mm
Neck thickness near 12th fret: 25.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
123036

Year of manufacture
1973

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.47kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.8mm

Neck thickness near 1st fret
19.5mm

Neck thickness near 12th fret
25.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing