USED Music Man / Silhouette Vintage Sunburst [11]

A representative model after EARNIE BALL/MUSIC MAN.
This silhouette is a model of LUKE, JP, and Steve Morse Sigunature, and the serial number indicates that it was made in 2000.
It is a long scale model with an alder body and maple neck/maple fingerboard, but the downsized body makes it extremely easy to play.
The asymmetrical neck shape reduces fingering stress, and the 4:2 peg layout maintains a perfect tension balance.
A DiMaggio DP151 pickup is standard, and the center single coil is a DiMaggio DP110EB.
There is some paint whitening and paint chipping on the head side of the first string side.
The neck and fingerboard are oil-finished, so they are darkened from use.
The body is generally scattered with large and small dents and scratches, and there are paint cracks on the neck joint and under the bridge.
The pegs have been replaced with locking pegs, the bridge saddle has been replaced with a non-stock black one, and there is a general feeling of use, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: G12495
Year of manufacture: 2000
Country of manufacture: USA
Case: Original hard case
Weight: 3.10kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number G12495

Year of manufacture 2000

Country of manufacture USA

CaseGenuine hard case

Weight 3.10kg

No truss rod problem.

Fret remainder no problem, there is enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.5mm

Neck thickness near the 1st fret: 21.0mm

Neck thickness near 12th fret 24.5mm

SCALE 648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment