USED Fender Japan / 1982 PB57-95 JV Candy Apple Red [11]

Fender Japan's first year of 1982 Fujigen production, JV serial, transition bass.
This model is a reproduction of the '57 Presition bass. Constructed with lacquer-finished alder body and 1-piece maple neck. Gold-colored baked aluminum pickguard.
This model is characterized by its traditional detailing and distinctive bass tone.
Overall, there are some paint burns and paint alteration, resulting in a silky texture with a slightly faded luster.
There is a large paint chip at the tip of the cutaway on the right side. There is a bandage mark on the left side of the body top. The pickguard around the jack is deformed. The jack is fixed in place, but is slightly floating.
The truss rod area on the neck pocket has been shaved. Screw holes for pickups on the neck side have been completely broken and the pickups cannot be seen. There are cracks and paint chips on the neck joint.
Overall, there are paint chips, scratches, dents, metal rust and corrosion, and the guitar shows signs of use.
The neck is slightly twisted and wavy, but there are no problems with normal use. The rod is not tightened. The truss rod is not eligible for free repair. Please note that the truss rod is not subject to free repair.
Item Rank: C+: Needs repair depending on intended use.

Serial Number: JV23947
Year of manufacture: 1982
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.06kg
Truss Rod: At the limit of the rod with a note of caution, the neck is currently in good condition.
Fret Depth: No problem, sufficient fret height.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 19.7mm
Neck thickness near 12th fret: 23.7mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
C+: Needs repair depending on intended use

12 months old

Serial No.
JV23947

Year of manufacture
1982

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.06kg

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
42.3mm

Neck thickness near 1st fret
19.7mm

Neck thickness near 12th fret
23.7mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair