USED Mary Guitars / Vista Toast-MT Bordeaux Red [11]

Mary Guitars' first thinline model "Vista Toast-MT" is now in stock!
Mary Guitars, a private workshop in Ogaki City, Gifu Prefecture, Japan, that produces and repairs original models.
The first thinline model "Vista Toast-MT" took about 6 years from conception to production, and the prototype was completed in 2023.
* This model is believed to have been created as a prototype of this model.

The following comments are made based on the specifications from the attached spec sheet.
Maple top/mahogany back, maple neck, rosewood fingerboard.
White pearl dot position marks, 22 frets, 25" scale
Reliable parts such as Gotoh tuners and Gotoh In-Tune bridge are used.
Two pickups are equipped: front: Mary Guitars x Euphoreal mini-Humbucker and rear: Euphoreal TL-Origin.
Controls are 1 volume, 1 tone, and 3-way pickup selector.

This is a one-of-a-kind guitar that combines a unique body design, high playability, use of reliable parts, and craftsmanship that does not skimp on detail!
It is in relatively clean condition with only minor scratches and some signs of use.
The neck is nearly straight and in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 423
Country of manufacture: Japan
Case: Gig Case
Accessories: Spec Sheet
Weight: 2.64kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.5mm
SCALE: 635mm (25")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number 423

Country of manufacture Japan

CaseGig Case

AccessoriesSpec sheet

Weight 2.64kg

No truss rod problem, rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.2mm

Neck thickness near the 1st fret: 21.0mm

Neck thickness 22.5mm near 12th fret

SCALE 635mm (25")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment