USED DEAN / USA Time Capsule V2 Trans Brazilia Burst [11]

Flying V style with powerful presence and vintage sound
The Dean USA Time Capsule V2 is a high-end model built in the Dean Custom Shop. The mahogany body, ebony fingerboard, and set neck construction deliver rich sustain and thick tone, while reliable hardware such as Grover pegs and a Tune-O-Matic bridge support stable performance on stage. This is one of our most coveted instruments, combining a vintage vibe with modern playability.
There are two paint chips on the body side.
The binding is cracked in several places, and there is an area near the 11th fret on the 1st string side that appears to have been repaired. There are other signs of use such as scratches, dents, and dull parts.
The neck is in perfect playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 05 01490
Year of manufacture: 2005
Country of manufacture: USA
Case: Original hard case
Weight: 3.97kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.3mm
SCALE: 628mm (24.75")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
05 01490

Year of manufacture
2005

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.97kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.3mm

Scale
628mm (24.75")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair