USED FERNANDES / MG-85C hide Model Crystal [11]

X Japan hide signature model, MG-85 Crystal.
This model is based on the "MG-480X" with wood grain head and "F" logo, and is equipped with FGI Technology pickups. Acrylic body, maple neck, 628 scale, rose fretboard, simple vol control, and Badasta type up-around bridge.
The neck binding was peeled off in several places and has been glued back on.
Overall, there are scratches, dents, and rust on the metal, showing signs of use.
The neck is slightly twisted, but the frets have been fretted and are in playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Case: Non-authentic gig bag
Weight: 5.02 kg
Truss Rod: No problem, with a note that the rod has been checked up to 60 degrees left and right (not much left).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Alterations: Strap pins replaced, nut groove filled and ground
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, strap pin replacement, nut groove filling, and mortise and tenon adjustment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Case
Non-genuine gig bag

Weight
5.02kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.3mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
22.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modified parts
Strap pins replaced, nut groove filled and mortised

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, strap pin replacement, nut groove filling, and mortising