USED Seymour Duncan / DJ-110R 75 Traditional Series 3-Tone Sunburst [11]

The DJ-110R '75 is a member of the "Traditional Series" made in Japan by ESP.
The combination of an ash body, maple neck, and rosewood fingerboard reflects the style of 1970s jazz basses of today. The block position markings give it a classical look.
The long scale length of 34 inches ensures a generous bass and taut response.
The pickups are genuine Seymour Duncan, with a nuance that combines warmth and a sense of output that aims for the traditional tone of Jazz Bass from the 50s to the 70s. The joints are loose in the clean tones, and the midrange is thick in the drive.
The controls are in the authentic configuration of 2 volume + 1 tone, making this model simple and easy to handle.
There are holes near each pickup where pickup fences were installed.
There are many scratches and dents on the exterior overall, and the metal parts are dull and rusty, showing a strong sense of use.
There is about 10-20% remaining in the direction of truss rod tightening.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 29601
Case: Non-authentic soft case
Weight: 4.94kg
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right, and it is fine (not much left)
Fretboard: With some notes, still can be cut, but the frets are low.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 39.2mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 25.0mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Alterations: Fret adjustments
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 29601

Case: non-genuine soft case

Weight 4.94kg

Truss RodCaution: The truss rod has been checked up to 60 degrees to the left and right (not much left).

Fret remainderCaution: Still can withstand cutting, but the frets are low.

String height: 2.5mm above the 12th fret on the bass string side

String height: 2.0mm above the 12th fret on the treble string side

Nut width 39.2mm

Neck thickness near the 1st fret: 21.0mm

Neck thickness 25.0mm near 12th fret

Scale 864mm (34")

RADIUS241mm (9.5")

Strings in setup D'Addario EXL165 / .045-.105 set

Modified part fret adjustment

Repair/Maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment